A tool for crimping contacts…
The tool is designed to compress contacts onto a wire in a single design, ensuring uniform application…
Hyperboloid nests
Hyperboloid sockets for a pin Ø 1.0 mm are designed for use in electrical connectors. These sockets…
Forks plus/minus
Plus (minus) cylindrical low-frequency plugs for volumetric mounting of threaded joints, designed…
Temperature sensor DT-10k
Датчик температуры ДТ-10к предназначендля более точного отслеживания показаний температуры в зоне…
DPB IN
The DPB B type fuse holder is designed to install a fuse insert with overall dimensions of 4x15 mm…
KP1a, KP1b
The instrument terminals KP 1a and KP 1b are designed to operate in DC and AC electrical circuits…
Plugs for connectors of…
Threaded plugs F58.632.023 and F58.632.024 with external and internal threads are designed to protect…
WPC 1-1, WPC 1-2
Fuse holders DPK1-1, DPK1-2 are designed for installation of PC and PC type fuses, for operation in…
Pads
Pads assembled with contacts are designed for the installation of wiring harnesses in products of…
Plug PCl.4
The operating temperature range is from minus 40 °C to plus 45 °C; The warranty period of the plug…
Radio components
n/a Name of the goods and materials Unit.ed. Quantity 1 Resistor CFR 1/4 W 180 UF APSHK.434110.001TU…
Cartridges F56.615.000;…
The cartridges are designed to illuminate the dashboard of cars. Lamps used: A 12-1,2; A24-1,2 GOST…
DVP 4
Holders of inserts of fusible fibreboard 4K are designed for installation of a fusible insert, work…
PR0, PR1, PR2
The contact clamps ZK0, ZK1, ZK2 are designed for operation in DC and AC electrical circuits (frequency…
Contacts, Tips, Staples,…
Contacts, tips, staples and pins are made of brass bands of the L63 and L68 brands. Type of electroplating:…
Spiral reinforced cables…
Spiral reinforced cables with a fork SNC1-5V/48-10T, SNC1-7V/48-10T, SNC1-15V/48-12T designed for…
ZMZ, ZMP
The small-sized ZMZ and ZMP clamps are designed to operate in DC and AC electrical circuits (frequency…
Additional resistances F5.3729.000;…
Additional resistances are designed to work in the circuit of the electric motor of the car heater.…
UK-1 Cable Extension
The UK-1 cable extension cable with a reinforced plug and socket is designed to connect a car antenna…
Relay and fuse housings…
Fuse blocks BPR-8, PR-8 T are designed for mounting and connecting plate type fuses.
BPR-3, BPR-9, BPR-13
Fuse blocks BPR-3, BPR-9, BPR-13 are designed to protect the electrical circuits of cars during overloads…
BPR-2, BPR-4, BPR-2M, BPR-5-4
Fuse blocks are designed to protect the electrical circuits of cars in case of overloads and short…
Cartridge-pads F56.615.012,…
Car lamp cartridge pads are designed for installation in external light-signaling devices of passenger…
Plug PCl.2
1. Operating temperature range from minus 40 °C to plus 45 °C 2. The warranty period of the plug is…
DVP 8
The holder of a melting insert of the DVP 8K type is designed to install a melting insert with dimensions…
Our company specializes in complex supplies of Connectors, such plants as ELECON (Russia) and others, as well as Cable and wire products (Russian manufacturers) for a wide service sector. Cooperation with leading domestic and foreign manufacturers allows us to offer our customers only high-quality products at the most favorable prices. We have been on the market for more than 5 years. Established contacts and work only with trusted suppliers, allows you to provide only high-quality products to the consumer. Individual approach to each customer and provision of qualified assistance.
Optimal
product prices
Advanced
assortment
Permanent
product update
Delivery
by different carriers
Profitable
cost
Need help selecting equipment?
Our staff is happy to help you with this!
